ClimateRight CR-2550 Manuel du propriétaire télécharger pdf (Page 166)

Equipment Operation

6-23

Operation

Power On. When the helm is powered up by the key switch 12 volt

DC energy is available at the depth gauge along with the remainder

of the instrument cluster. You do not need to press the “ON/OFF

MODE” keypad.

The LCD will illuminate showing the depth and the type of units

selected; feet (FT), meters (M), or fathoms (F). To deactivate the

depth sounder, hold the “ON/OFF MODE” keypad for 4 seconds.

If you press the “ON/OFF MODE keypad again the unit will be

reactivated.

Depth Alarm. Shallow mode: If you press the “ON/OFF” MODE”

keypad again the “SH” shallow depth alarm setting is displayed. This is

the shallowest water that will energize the alarm. Press and hold the up

or down arrow keypads to adjust the reading to the desired depth.

Depth Alarm. Deep Mode: By pressing the “ON/OFF MODE” keypad

displays again the “DP” deep depth alarm setting. This is the deepest

water that will energize the alarm.

Press and hold the “UP” or “DOWN” keypads to adjust the reading

to the desired depth. When the shallow depth setting is read by the

depth ﬁ nder, the “SH” will ﬂ ash on the LCD and the audible alarm

will sound in a rapid sequence. When the deep depth setting is read

by the depth ﬁ nder the “DP” will ﬂ ash on the LCD and the audible

alarm will sound at 2 beeps per second.

Note: To fully deactivate the alarm, reset it to zero. Pressing the “ON/

OFF MODE” keypad temporarily deactivates the alarm. To reactivate

the alarm press the “ON/OFF MODE” keypad until the depth read-

ing appears.